2024 SCAG Power Equipment SFC-30 SFC30-7CV

Information

2024 SCAG Power Equipment SFC-30 SFC30-7CV

FINISH CUT WALK-BEHIND

Welded and fabricated using military-grade steel for years of dependable performance, the SFC-30 Finish Cut Walk-Behind Mower is no pushover. Packing big productivity and versatility into a compact form, this commercial-grade machine delivers a beautiful, professional quality-of-cut, helping you put the finishing touches on the job or at home.

Features may include:

FINE-TUNED AND SIMPLE
  • Adjust the height-of-cut from a single location rather than at all four corners or having to adjust the front and back tires separately. Refine your height settings with adjustments from 1.5” to 5” in .25” increments.
SIMPLIFIED DECK DRIVE SYSTEM
  • An offset blade design is less complex and easier to maintain than traditional timed deck setups. This more robust system results in potential belt replacements taking less than half the amount of time to repair/replace compared to timed deck systems. Image shown with bagging baffle.
UNMATCHED PERFORMANCE
  • The large cutting chamber helps process more grass while being able to eat through wet and lush spring time grasses more efficiently. Cutter deck discharge opening is oversized for its class.
ERGONOMIC CONTROLS
  • Angles of operator station controls match the natural angles of your outstretched hands. All controls are within easy reach: blade brake engagement, drive engagement, recoil start, throttle/choke, hour meter and park brake.

Photos

Highlights

  • Dexter, Missouri
  • 2024
  • SCAG Power Equipment
  • SFC-30 SFC30-7CV
  • Available
  • Tracking: 28.75" | (w/ discharge chute): 36.75" | (w/ discharge block off plate): 31.5"
  • Lowest Operating: 36.75" | Max Operating: 45.25" | w/ Handle Bar in Storage Position: 57.5" | Cutting: 1.5" to 5" in .25" increments.

Specifications

  • 2024
  • SCAG Power Equipment
  • SFC-30
  • SFC30-7CV
  • Walking
  • Kohler 224CV engine – recoil-start engine
  • Hand lever
  • 9” x 2.25” rubber tire w/ glass-filled polypropylene wheel
  • 10.5" x 3" rubber tire w/ glass-filled polypropylene wheel
  • Forward Ground Speed: Up to 4 mph
  • Transport (handles in upright transport position): 41" | Minimum (handles in highest operating position): 66" | Max (handles in lowest operating position): 73.5"
  • Tracking: 28.75" | (w/ discharge chute): 36.75" | (w/ discharge block off plate): 31.5"
  • Lowest Operating: 36.75" | Max Operating: 45.25" | w/ Handle Bar in Storage Position: 57.5" | Cutting: 1.5" to 5" in .25" increments.
  • 30"
  • 1 gallon
  • Blade Type: Optimized for maximum performance whether discharging, mulching or bagging | Deck Lift: Hand lever. Single-point adjustment. | Blade Engagement: Blade brake clutch allows operator to disengage cutter blades without shutting off the machine.
  • Operating Weight - Bagging: 220 lbs. | Operating Weight - Mulching: 214 lbs. | Operating Weight - Discharging: 213 lbs.
  • Type: Extra-strong, fully fabricated and welded steel cutter deck. Offset blade, non-timed deck setup. | 14-gauge, grade 100, Military Grade steel deck shell with 12-gauge spindle reinforcement plate. ¼” trim side reinforcement bar offers extra protection against impacts.
  • Aluminum housing with sealed ball bearings.