2024 SCAG Power Equipment SFC-21 SFC-21-5CV

Information

2024 SCAG Power Equipment SFC SFC-21-5CV

THE BEST ON THE JOB OR AT HOME

The Scag® SFC-21 Finish-Cut Walk-Behind mower is the compact machine you’ve always wanted—packing big productivity and versatility into a 21” wide platform. On the job or at home, the SFC-21 delivers a professional quality-of-cut that leaves behind a beautiful lawn, each and every time. Capable of 3-in-1 versatility (mulching, bagging and optional side discharging), it helps you tackle whatever challenges come your way with top-notch results.

Features may include:

EASY HEIGHT-OF-CUT ADJUSTMENT FINE-TUNED AND SIMPLE

  • Easy height-of-cut adjustment allows for cutting heights from 1.5” to 4.5” in .5” increments.

SCAG LEVEL QUALITY-OF-CUT PERFORMANCE FOR THE LONG HAUL

    li>Strong, stamped steel deck ensures years of worry-free performance and a consistent cut.
GET MORE DONE WITH ONE MACHINE DESIGNED FOR VERSATILITY

    li>Capable of 3-in-1 versatility, giving you the ability to mulch, bag or side-discharge. Mulching and bagging attachments come standard; side-discharge accessory is available.

  • BUILT TO LAST DEPENDABLE, WORRY-FREE PRODUCTIVITY

      li>Heavy-duty construction ensures years of dependable service and worry-free productivity.

Photos

Highlights

  • Dexter, Missouri
  • 2024
  • SCAG Power Equipment
  • SFC-21 SFC-21-5CV
  • Model: CV173 | Type: 4 cycle, OHV, Heavy-duty industrial/commercial
  • GT MG 512 transmission, 3-speed
  • gas
  • Available
  • 23.25"
  • Operating Position (low / high): 32.75" / 43.5" | Storage Position: 22" | Cutting: 1.5" to 4.5" in 0.5" increments

Specifications

  • 2024
  • SCAG Power Equipment
  • SFC-21
  • SFC-21-5CV
  • Walking
  • Model: CV173 | Type: 4 cycle, OHV, Heavy-duty industrial/commercial
  • Kohler® Command PRO®
  • Easy-Pull™ recoil start
  • Horsepower: 5HP @ 3300 RPM
  • 173 cc
  • One with cast-iron cylinder bore
  • air-cooled
  • gas
  • Quad-Clean™ four-stage
  • cyclonic air filter
  • Side discharge muffler with guard
  • Mechanical governor with variable speed control set at 3300 rpm, idle set at 1500 rpm
  • Transmission
  • GT MG 512 transmission, 3-speed
  • Travel Control: Variable drive control bar and 3-speed selector lever on handlebar
  • 0.50" diameter
  • Type: Heavy-duty Blade Brake Clutch (BBC)
  • 10.5 x 3
  • 9 x 2.25
  • Forward: Up to 4.25 mph
  • Oil: Steel oil pump; Full pressure lubrication with spin-on oil filter
  • 14 gauge
  • Handle Bars: 1" diameter, thick wall tubing, 3-position adjustable | Cutter Blade: 0.1345 in. thick, milled edge, wear resistant
  • Operating Position: 63.0 - 68.5" | Storage Position: 41"
  • 23.25"
  • Operating Position (low / high): 32.75" / 43.5" | Storage Position: 22" | Cutting: 1.5" to 4.5" in 0.5" increments
  • 21 inches (53.34 cm)
  • 21.2"
  • 0.37 gallon (1.4 liters) plastic tank
  • without bagger: 132 lb | with bagger: 137 lb
  • Safety Group: Handle actuated operator presence system
  • 14 gauge deck with 14-gauge replaceable guards for strength and longevity. Deep draw stamped.